A795 User Guide: Programming Supplement
Chapter 2: Diagnostics and Configuration
15
Printer configuration
Printers are shipped with all the functions and parameters pre-set at the factory. Settings for
various printer parameters can be changed. This menu is printed on the receipt and scrolls through
instructions for selecting and changing any of the functions or parameters.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently
changing other settings that might affect the performance of the printer.
The following functions and parameters can be changed in
the scrolling configuration menu (except as noted):
•
Communication Interface
•
RS-232C seral interface (9-pin)
•
RS-232C serial interface (25-pin)
•
Universal serial bus (USB)
•
RS-232C serial interface settings
•
Baud rate
•
Data bits (can not be changed)
•
Stop bits (can not be changed)
•
Parity (can not be changed)
•
Hardware (DTR/DSR) or software (XON/XOFF)
flow control
•
Data reception errors
•
Printer Emulations
•
A795 native mode
•
A794 emulation
•
Axiohm A793
•
Epson TM-T88
•
Printer settings and functions
•
Default lines per inch
•
Carriage return usage
•
Data scope mode
•
Power supply wattage
•
Knife options
•
Paper low sensor
•
Printhead resistance setting
For more information about See this section
Using the configuration menu “Configuring the Printer”
to configure the printer
on the next page.
