Operation instructions | MK 8-00 | MK 16-00 | MK 8-06 | MK 16-06
22
2021-08-01 | Technical improvements, changes in design, printing- and other errors reserved.
è
Check the fill levels and click OK.
4.2.1.
Remux mode
If the the Net
work ID
are set on
auto
, the device works in the Remux mode. In this mode, the IDs from the set
transponder and from the satellite are used and forwarded to the modulators with virtually no changes. The
TS ID1
to
TS ID8/16
of the modulators, are also set on
auto
.
Note:
è
If the device is already set to CROSS MULTIPLEX MODE, set the
Network ID
to
auto
.
è
Click on SAVE CHANGES.
The device ist set back to REMUX MODE.
