2021-08-01 | Technical improvements, changes in design, printing- and other errors reserved.
9
2. Mounting and Installation
The compact headend can be mounted on either at the wall or be mounted in a 19 "rack.
è
Installation must be performed by authorized and skilled electricians only.
è
The headend must only be operated indoors.
è
Before mounting and installation, pull the mains plug (1)!
è
The antenna system must be installed and grounded according to the EN 60728-11 standard.
è
Install the device in compliance with the safety regulations defined by the EN 60728-11 standard.
2.1.
Wall mounting
The compact headend are factory-fitted with wall brackets.
Note:
The unit must be wall mounted with at least 5 cm clearance along the 4 sides.
è
The installation must be carried out on an even and vertical surface (any unevenness must be
compensated).
è
Fix the headend with with minimum four pcs. of 4 × 30 mm screws (2).
