2021-03-17 | Technical improvements, changes in design, printing- and other errors reserved.
39
3.19. Driver upgrade
The software update for the EoC 10/20-02 is a two-step process. In this case you first load the update file into
the so-called "Upload Area" of the EOC 10-01 or EoC 20-01. Then you update Master and after this the
Endpoints.
3.19.1. Step 1 – Upload of the Firmware
Click on
Upload Firmware
in the main window.
Select the unpacked files and upload it with
Start
.
Click on
Devices
in the main window.
The new versions are available in the Upload Area.
The devices that have older drivers than the driver versions in the upload area are displayed in yellow.
3.19.2. Step 2 – Upgrade of the Master and the Endpoints
Select the
Master
and click the "Upgrade EoC" button.
The EoC driver is updated on the master.
The line of the EoC Master then turns green.
Now select the
Endpoints
and click the "Upgrade EoC" button.
The EoC driver is updated on the Endpoints.
Select the
Endpoints
again and click the "Upgrade WiFi" button.
The WiFi driver is updated on the Endpoints.
The lines of the EoC Endpoints then turns green.
