Axi STS 6003, Instruction, Operating, & Maintenance Manual

Page: 5 / 26

REV03016704010220
4
General Overview
STS 6003 | 7003 Specifications
Nominal Flow Rate…………………………………………….. 3 GPM/180 GPH (11.4 LPM/681.4 LPH)
1,440 gallons (5,451 liters) per 8-hour shift
4,320 gallons (16,353 liters) per 24-hour shift
Primary Filter…………………………………………………… 10 or 30 μ Particulate or 60 μ Stainless Steel
Screen with Centrifugal Water Separator
Secondary Filter……………………………………………….. 1, 3, 10, or 25 μ Fine Filter or 3, 10 μ Water Block
Fuel Conditioner……………………………………………….. LG-X 1500 Inline Magnetic Conditioner
Plumbing………………………………………………………... Black Iron
Inlet Port………………………………………………………… 3/4” NPT
Outlet Port…….………………………………………………… 3/4” NPT
System Enclosure…………………………………………….. NEMA 4 Rated Powder Coated or NEMA 4X Rated Stainless
Steel
Operating Temperature (6000 Series)………………………. 41 - 104°F (5 - 40°C )
Operating Temperature (7000 Series)………………………. 41 - 122°F (5 - 50°C )
Electrical……………………………………………………….. 120V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
Pump…………………………………………………………… 1/3 HP Spur Gear Pump
Suction Capability (Primed)………………………………….. 15ft. vertical lift or 100ft. horizontal run (lines >1”, primed)
Timer………………………………………………………….... Incorporated PLC-based timer
Maximum Fluid Viscosity…………………………………….. 5 cSt
Outline Dimensions………………………………..………….. ≈ 36” x 36” x 12” (91 x 91 x 31 cm) (H x W x D)
System Weight………………………………………………… ≈ 290 lbs (131.5 kg)
*Note: It is the user’s responsibility to ensure safe operating conditions for the system to be ran.
*At 50 Hz., nominal flow rate decreases from 3 GPM/180 GPH to 2.4 GPM/144 GPH.
!WARNING! This system is not meant for use with gasoline or any other flammable liquids having a flash point
less than 100°F (37.8° C). Use with gasoline or any flammable liquids at a temperature exceeding their flash point
presents an immediate explosion and fire hazard.