Axess-tel MV510, User Manual

Page: 9 / 56

MV500V SERIES (
VER. STD 0.6)
8
Top-View LED Display
LED lights on the top of the Modem indicate which functions are operating. The
LED lights allow you to know at a glance if your Modem is in EV-DO or 1X mode,
connected to the Internet and in Wi-Fi or Ethernet operation. This feature
eliminates the need for advanced software and status-monitoring procedures.
Web-Based Advanced User Interface
You can easily setup the Modem’s advanced functions through your
AxessManager web browser and without having to install additional software onto
your computer. There are no disks to install or keep track of. And, best of all, you
can make changes and perform setup functions from any computer on the
network—quickly and easily.
NAT IP Address Sharing
Your Modem employs
N
etwork
A
ddress
T
ranslation (NAT). NAT allows your
networked computer devices to share a single IP address, saving the cost of
adding IP addresses to your Internet service account.
Integrated 10/100 4-Port Switch
The Modem has a built-in, 4-port network switch to allow your wired computers to
share printers, data, MP3 files, digital photos and much more. The switch features
automatic detection so it will adjust to the speed, half duplex, and full duplex of
connected devices. The switch transfers data between computers and the Internet
simultaneously without interrupting or consuming resources.
Support for VPN Pass-Through
If you connect to your office network from home using a VPN connection, your
Modem will allow your VPN-equipped computer to pass through the Modem and
to your office
network.
Built-In Dynamic Host Configuration Protocol (DHCP)
Built-In Dynamic Host Configuration Protocol (DHCP) makes for easiest possible
networking. The DHCP server automatically assigns IP addresses to each
computer, eliminating the need for a complicated networking setup.
Integrated 802.11g Wireless Access Point
802.11g is an exciting new wireless technology that achieves data rates up to