AXEM Technology
11, rue Auguste Perret - ZAC Europarc - 94042 Créteil Cedex France
Tél. : +33 (0)1 41 94 11 85 - Fax. : +33 (0)1 49 56 91 52 - [email protected] - www.axemtec.com
Page 24/31
AT188N User guide
Page 25
AT188N User guide
AT188N Product User guide
Company
ATID Co., Ltd.
Doc Name
User guide
Writer
Won-Tak Choi Date
2016-03-02
Ver.
v0.3
Time+ID+BarcodeMode
: Time data, ID of barcode and read barcode
data will be stored or transferred
“2. Time format”
: In case of that the time will be stored or transferred with the
read barcode, user can set up the time format
“*” is marked in selected item
Year
: Choose to use the year data or not at the time data (YYYY)
Month & Date
: Choose to use Month & Date or not at the time
data(MMDD)
Hour & Minute
: Choose to use Hour & Minute or not at the time
data(HHMM)
“3. Quantity”
: Choose to input tag quantity. Quantity settings can be operated in
the only barcode mode and its settings might be possible after reading the
barcode tag. User can get AT188 to input quantity from 1 to 9999 and it cannot
read another tag before inputting applicable tag quantity. “*” is marked in default
settings
“4. Numbering”
: Store or transfer the data index when reading the barcode and
RFID tag. If the memory is vacated, it will be started from 1
“5. Terminator”
: Select which letter will be attached at the end of data among LF,
CR, CR&LF, Tab, Space, Semicolon when transferring the data via host
“6. UHF Report”
(UHF Only)
: Select whether only EPC data is sent or both the
EPC data and PC data is sent when transferring the UHF RFID Tag Data
7.2.7
“6. System”
Set up to use the time, sound, vibrator, LCD and ETC are needed or not
10:00P
?
< < go back > >
Year
*Month & Date
*Hour & Minute
AT188N
User guide
