39
HOME PAGE/GRAPHIC VIEW | AUDIO OUTPUTS
FALCON · User Manual · ENG
From this ADVANCED graphical view, it can be tracking the audio outputs path.
A.
In this corner it contains the four main sources, where the first three sources branch off from the same processed audio signal.
1.
WIDE BAND PROCESSED: Wideband audio, also known as wideband voice or HD voice. Wideband audio relaxes the bandwidth limitation
and transmits in the audio frequency range of 50 Hz to up to 20 kHz for
DAB
and
HD radios
.
2.
FM AUDIO PROCESSED: PRE-emphasized, 20 Hz – 15 kHz bandwidth.
3.
FM DELAYED PROCESSED: This kind of signal serves to synchronize the digital broadcast with the analog broadcast signal.
4.
DIRECT SOURCE: by this source it can send the input audio signals, Multimedia, MPX decoder or Generator directly to the outputs.
B.
Here we find in this part the three main outputs (DIGITAL-1, DIGITAL-2, ANALOG) except the streaming
*
that are managed from the
ADVANCED VIEW of MONITOR section. Each of these outputs contains a manual changeover that allows you to choose the required source
from four sources which are (WIDE BAND PROCESSED, FM AUDIO PROCESSED, FM DELAYED PROCESSED and DIRECT SOURCE). Also, once
you click on the double gear
⛮
, you will be moved to the section where there is also an available Level adjustment and Rate
**
.
C.
DIGITAL OUTPUT MODE: From here, we can choose if we want to send the DIGITAL signal to AES EBU or DANTE
*
.
D.
LEVEL METER: here can monitor the final audio signal level.
*
Optional.
**
Digital outputs only.