38
HOME PAGE/GRAPHIC VIEW |AUDIO OUTPUTS
FALCON · User Manual · ENG
AUDIO
OUTPUTS
There are two digital AES/EBU outputs and one analog output. All digital and analog outputs can be independently switched to emit WIDE BAND
PROCESS, FM AUDIO PROCESS and FM DELAYED PROCESSED signal.
DIGITAL1: the left/right digital outputs are on one XLR-type male plug on the rear panel.
DIGITAL2: the left/right digital outputs are on one XLR-type male plug on the rear panel.
ANALOG: the left/right digital outputs are on two XLR-type male plug on the rear panel.
Both analog and digital outputs are active continuously.
According to AES/EBU standard, each digital output line carries left and right stereo channels. The connection is 110 Ohm balanced. The AES/EBU
standard specify a maximum cable length of 100 meters. While almost any balanced and shielded cable will operate for relatively short periods (5
meters or less), longer rounds require the use of a 110 Ohm balanced cable such as Belden 1800B.
From the miters monitoring the audio level on outputs both digital and analog. By clicking on the setting icon (double-gear
⛮) of each output
can change the parameters of it like (Source, Rate, and Level).
When you click on ADVANCED It will automatically switch to a graphical interface that allows you to track the signal to the audio
outputs in an expanded and more detailed way as shown in next figure.