213
TECHNICAL SPECS | ASCII COMMANDS
FALCON · User Manual · ENG
Pilot Distortion
0,05% (typical)
Pilot Dist Noise
0,068% (on 100KHz band)
Composite out THD
0,01% (typical on the whole band)
Stereo Separation
>70 dB (typical on the whole band)
Linear Crosstalk Main to Sub / Sub to Main
>70 dB (minimum)
Digital filtering / band
30 Hz to 15 kHz (-0,1dB), 17 kHz (-70 dB), 19 kHz (-100 dB)
57 kHz (RDS/RBDS) Protection
Better than 51 dB
Pre-emphasis
Off, 50uS, 75uS (+-0,1dB)
Freq Response
±0,3 dB (30Hz-15kHz)
Operation
Mono / Stereo
MPX/RDS Output
Adj from -10,0 dB to 15,0 dB (0,1 dB step)
Signal/Noise Ratio
≥ 85 dB (on 100 kHz band)
Carrier Suppression
> 85 dB
System
GPIO Inputs/Outputs
6 GPI / 4 GPO
Communication Port
2xRS232, 3xUSB, 1xLAN
Synchronization
Ext(Pilot Mpx)/ Int/ Auto
Synchronization Monitoring
Yes
RDS Level adjustment
Digitally controlled
Phase adjustment
Yes, 0 ÷ 359.9°
Separate outputs for RDS+MPX and for RDS only
Yes
Command to activate the RDS SCA
Yes
Side Chain Mode, Loop through mode, Bypass feature
Yes
RDS Subcarrier
100% Digitally Generated Shape
CENELEC – EN50067 compliant –
Yes
Accurate Clock Time (CT) Sync with Internet Connection
Yes
Remote TA actuation for Traffic Announcements
Yes
GPS module for automatic synchronization of the built-in Real Time
Clock (RTC)
Optional (USB External)
RDS decoder for rebroadcasting RDS Data
Yes
Firmware can be upgraded in the field
Yes