Axel MACROTEL X1, User Manual

Page: 26 / 68

MACROTEL X1 MACROTEL X2 GENERAL DESCRIPTION
| MACROTEL X1 MACROTEL X2 GENERAL DESCRIPTION 26
As regards the Opto Interface port pinout see the Appendix at the end
of this manual. For the operation of each GPI and GPO see the
specific section in the next pages of this manual.
5
ANALOG OUTPUT
Electronically balanced analog audio output of the hybrid, on Balanced
XLR connector, Mono type. The two XLR connectors feature
respectively:
1L = telephone hybrid -1 output
2R = telephone hybrid -2 output
6
ANALOG INPUT
(ANALOG INPUT -A)
Inputs of telephone hybrid, with electronically balanced XLR
connection. These inputs are for the signals to ne sent to the
interlocutors via the telephone line. This signal must be of the Mix-
Minus type coming from N-1 devices or Telco modules. The two inputs
are divided as follows:
1L = telephone hybrid -1 input
2R = telephone hybrid -2 input
7
TELEPHONE UNIT
LINE-1
GSM-SET-LINE
This unit features the RJ11 6/4 connectors to connect the
PSTN/POTS telephone line to the telephone Hybrid n°1 (
LINE socket)
and to connect a telephone device in parallel to the hybrid ( SET
socket) used, for example to dial the number to call or to answer an
incoming call.
The
GSM connector on RJ10 connector is used for the audio
connection to the Wireless GSM module (opt); the connection cable is
supplied together with the Wireless GSM module, together with a
second cable to be connected to the
Serial-2 port. See the appendix
at the end of this manual for the connection.
7
TELEPHONE UNIT
LINE-2
GSM-SET-LINE
This unit features the RJ11 6/4 connectors to connect the
PSTN/POTS telephone line to the telephone Hybrid n°2 (
LINE socket)
and to connect a telephone device in parallel to the hybrid ( SET
socket) used, for example to dial the number to call or to answer an
incoming call.
The
GSM connector on RJ10 connector is used for the audio
connection to the Wireless GSM module (opt); the connection cable is
supplied together with the Wireless GSM module, together with a
second cable to be connected to the
Serial-1 port. See the appendix
at the end of this manual for the connection.