MACROTEL X1 - MACROTEL X2 CONNECTION PROCEDURE
| MACROTEL X1 - MACROTEL X2 CONNECTION PROCEDURE
47
The telephone line from the central office must be connected to the “LINE” connector; a normal telephone set can be
connected in parallel to the phone line using the “SET” connector, for example to make calls. Please note that this socket
is NOT always active
; it depends on the status of the ‘Hook’ key of each Hybrid. When the Hook key is pressed the
“SET” socket is not active. The SET socket has the same pinout as the “LINE” socket.
If the unit has operating problems caused by lightening or over voltage, disconnect it immediately from
the telephone line and electric power supply; do not reconnect it until the device has been duly
checked. If in doubt contact the technical assistance service. Make sure also that your system is fitted
with adequate lightening protection. If this is not the case, we recommend disconnecting all
connectors during thunderstorms or if the device is not used for long periods of time.
