Axel GENIUS D User Manual Download Page 57 | Manualshive

Page: 57 / 58

Axel GENIUS D User Manual Download Page 57

WARRANTY

| WARRANTY

20 WARRANTY

The manufacturer offers a one-year warranty ex-factory. Do not open the device. Possible breakage of warranty seals
invalidates the same. The manufacturer will not be liable for damages of any kind arising from, or in relation to, improper
use of the product.

21 DECLARATION OF ROHS CONFORMITY

To minimise environmental impact and to take more responsibility with regard to the earth we live in, in accordance with
European Union Directive 2002/95/EC, known commonly as RoHS (

Restriction of Hazardous Substances

),

We herewith declare,

Axel Technology srl
Via Caduti di Sabbiuno 6/F
40011 Anzola Emilia

– Bologna - Italy

that the product listed below complies with the requirements of Directive2002/95/EC, Article 4, paragraph 1 with
reference to hazardous chemical substances:

Lead (Pb)
Hexavalent Chromium
(CrVl)
Mercury (Hg)
PBB (Flame Retardant)
PBDE (Flame Retardant)
Cadmium (Cd)

Product Description:

GENIUS D

Authorised Company Representative:

Title of Signatory:

Date:

Christian Sighinolfi

–

Technical Manager

27 Aug. 2012

«
...
55
56
57
58
»

Summary of Contents for GENIUS D



























































Reviews:

No comments