Axel GENIUS D, User Manual, Page: 20 / 58

GENERAL DESCRIPTION OF GENIUS D
| GENERAL DESCRIPTION OF GENIUS D
9 GENERAL DESCRIPTION OF GENIUS D
9.1 GENIUS D FRONT PANEL
N
O.
CONTROL NAME
FUNCTION
1
LCD DISPLAY
LCD display on two lines that shows the status and operation of
Genius D. All the technical parameters for each menu are displayed.
2
JOG-SHUTTLE
JogShuttle in order to be able to access the various navigation menus
and to make changes. Clicking the JogShuttle will confirm the
selection. Accessing the Menu, it is possible to fully configure the
machine to the mode of operation on its Analog output. All of these
parameters can also be set by control, configuration and
Axel Audio
Changeover Remoter. command software.
3
"ESC" KEY
clicking this key cancels any changes made or you exit the selected
menu
4
"MAN A/B" KEY
By clicking the
MAN AT/B key, you send alternatively on the Genius D
analog output either the Input A signal or the Input B signal . Clicking
this button DISABLES the AUTOMATIC features.
It is also possible to see physically which input is located on the
analog output via the front display that presents the relevant input
under
ANALOG OUTPUT . Each click corresponds to a change of
input.
5
"AUTO" KEY
By clicking the AUTO key the Genius D is set in automatic mode
resulting in the two inputs being controlled and in the case where one
of the two is no longer valid, switching will be performed between the
sources.