Axel GENIUS D, User Manual, Page: 26 / 58

USE OF THE AUDIO CHANGEOVER REMOTER SOFTWARE
| USE OF THE AUDIO CHANGEOVER REMOTER SOFTWARE
12 USE OF THE AUDIO CHANGEOVER REMOTER SOFTWARE
Start-up window of the Genius D control software
12.1 ACCESS VIA USB AND SERIAL CONNECTION
To be able to operate within Genius D, the Axel Audio Changeover
Remoter application must be used, launching it via the appropriate
icon. Below the page for the connection between Genius D and PC
using USB Virtual serial port .
As can be seen, a
COM5 port USB connection of the PC is being
used from which you are operating. The USB connection and the
serial connection are the more immediate to run, once a Pin-to-Pin
serial cable or a A-Bentrambi type USB cable provided within the
Genius D package is connected; simply click the
CONNECT button
and the panel for management of the device will open.
Clicking the Connect key, the Audio Changeover Remoter enters into communication with Genius D, and all the
information in the memory of the device, the status and operation of the same will be displayed. The management panel
changes format and offers all the commands necessary for putting into operation of the device. The various controls are
explained in detail in the next few chapters.