DETAIL
OF AUDIO CHANGEOVER REMOTER
| DETAIL OF AUDIO CHANGEOVER REMOTER
Example 2:
In the example above, it can instead be seen how it is possible to send the DTMF commands to other devices both of
Fox and of Genius D, and to use the DTMF Encoder and Decoder to close or open the GPOUT.
CMD STRING #1
Significance of
***3101
:
***=
Command sent indiscriminately to all DTMF decoders (Fox and Genius (D) entered in the network.
3 =
Action to be performed on GPO (3).
1 =
if the command is 3, then it is possible, by entering 1, to close the GPO1 ( If O=3 -> C=1: Set DTMF FUN1).
01 =
01 minutes multiplied by x 5 stable minutes = 05 minutes, i.e. the above requested command is run for 05 minutes,
at the end of which the command is terminated and the initial condition returns, which is the same as before execution of
the command.
CMD STRING #2
Significance of
***3201
:
***=
Command sent indiscriminately to all DTMF decoders (Fox and Genius (D) entered in the network.
3 =
Action to be performed on GPO (3).
2 =
if the command is 3 then it is possible, by entering 2, to reset the closure of the GPO1 consequently restoring it to the
initial condition ( If O=3 -> C=2: Reset DTMF FUN1).
01 =
01 minutes multiplied by x 5 stable minutes = 05 minutes, i.e. the above requested command is run for 05 minutes,
at the end of which the command is terminated and the initial condition returns, which is the same as before execution of
the command.
Summary of Contents for GENIUS D
