RDS / RBDS GENERATOR - GENERAL SETUP
17.1 RDS GENERATOR – RDS ENCODER BLOCK DIAGRAM
17.1.1
ON/OFF, RDS PHASE AND LEVEL
Open the 'RDS SETTINGS' windows from the main tree menu. In the relative panel, select the
'
RDS on
' option to enable RDS generation. The RDS carrier can also be turned on or off via
the front panel.
The RDS Level cursor sets the RDS generation level within a range of - 44.0 and - 20.0 dB,
where 0 dBm is a deviation of 75 kHz.
The table below shows
the relationship between
the level and the signal deviation. The default value is -31.5dB, i.e. a deviation of D = 2.0 KHz.
-37.5 dB
D=1.0 KHz
-31.5 dB
D=2.0 KHz
-28.0 dB
D=3.0 KHz
-25.5 dB
D=4.0 KHz
-23.5 dB
D=5.0 KHz
-21.9 dB
D=6.0 KHz
17.1.2
UECP OR NON-UECP COMPATIBLE PROGRAMMING MODES
The Extended/non-UECP mode incorporates a full set of 'customised' features/controls,
which represent the extra value offered by the Falcon XT. The Extended mode will be
outlined in the following pages, as it also includes the UECP-compliant mode.
| RDS / RBDS GENERATOR - GENERAL SETUP
- 61
Summary of Contents for Falcon VS
Page 1: ...Falcon XT User Manual FM Audio Processor Rev 2 2 ENG...
Page 25: ...BLOCK DIAGRAM OF FALCON XT 10 BLOCK DIAGRAM OF FALCON XT BLOCK DIAGRAM OF FALCON XT 25...
Page 96: ...TECHNICAL APPENDIX 20 6 4 Operative Example TECHNICAL APPENDIX 96...
Page 106: ...APPENDIX I FALCON XT MIB 23 APPENDIX I FALCON XT MIB APPENDIX I FALCON XT MIB 106...