AUDIO CONTROL
16.7 MULTIBAND CONTROL AND MULTIBAND PROCESS /1
In the Multiband control page, you can define the amount of compression to apply to each bandwidth, ranging from a
minimum of - 6.0 dB to a maximum of + 6.0 dB. Using this control, you can set the threshold at which the compressor
must react.
A Threshold setting of 0dB (extreme high) means that the compressor only works when the level of that bandwidth
reaches of 0dB. Conversely, a setting of -9.0dB (extreme low) means that the compressor starts to work when the audio
level within that bandwidth reaches at least -9.0dB. Clearly, with a setting of around 0 dB, the compressor tends to work
very little and therefore maintains the original quality of the audio material inputted into the processor. Values closer to -
9dB, meanwhile, tend to keep the compressor working constantly and therefore, as the dynamics are reduced, the audio
inputted into the audio processor will generally be processed (with values between-6.0dB and +6.0 dB).
16.8 FALCON XT CROSS OVER FREQUENCY
In the below figure the Falcon XT band cross over frequency. All the filtering has been made via digital DSP filtering and
the slope is 12dB/oct
| AUDIO CONTROL
- 54
Summary of Contents for Falcon VS
Page 1: ...Falcon XT User Manual FM Audio Processor Rev 2 2 ENG...
Page 25: ...BLOCK DIAGRAM OF FALCON XT 10 BLOCK DIAGRAM OF FALCON XT BLOCK DIAGRAM OF FALCON XT 25...
Page 96: ...TECHNICAL APPENDIX 20 6 4 Operative Example TECHNICAL APPENDIX 96...
Page 106: ...APPENDIX I FALCON XT MIB 23 APPENDIX I FALCON XT MIB APPENDIX I FALCON XT MIB 106...