APPENDIX H – FIRMWARE UPDATE PROCEDURE
f.
Select the
PC serial port
on the screen
g.
Switch off
the Falcon XT device
h.
Switch on the Falcon XT device
and press the CONNECT button within 3 seconds
i.
Once the software is connected
to the Falcon XT device, the following page will appear: At the same time the front
display of the device
remains completely blank
, showing nothing.
j.
Once the Falcon XT is connected to the software, click
PROGRAM
k.
The Firmware upgrade will start; at the end, click
EXIT
, then switch the Falcon XT off then on again.
l.
Do not stop or switch off or close the upgrade software, as this could impair operation of the device.
| APPENDIX H – FIRMWARE UPDATE PROCEDURE
- 105
Summary of Contents for Falcon VS
Page 1: ...Falcon XT User Manual FM Audio Processor Rev 2 2 ENG...
Page 25: ...BLOCK DIAGRAM OF FALCON XT 10 BLOCK DIAGRAM OF FALCON XT BLOCK DIAGRAM OF FALCON XT 25...
Page 96: ...TECHNICAL APPENDIX 20 6 4 Operative Example TECHNICAL APPENDIX 96...
Page 106: ...APPENDIX I FALCON XT MIB 23 APPENDIX I FALCON XT MIB APPENDIX I FALCON XT MIB 106...