Axel Falcon VS, User Manual, Page: 31 / 111

USE OF UNIVERSAL REMOTER SOFTWARE
13.3 DIRECT UPLINK TO VIA MODEM
Every
time the connection to the Falcon is made using two dial-up modems, select
'MODEM' in the Communication Channel configuration windows. The default link
mode is ‘two-way'.
Please see the APPENDIX to this manual for the physical connection between the modem and the Falcon at the remote
end (Serial Port 1 of the Falcon must be used for this).
Using the Universal Remoter software, set the serial port used for the modem connection and the connection speed
thereof (usually 38,400 baud for POTS/PSTN modems and 9600 Baud for GSM modems). You must also enter a
modem initialisation string.
SERIAL PORT
Select the PC serial port to use for the connection (from 1 to 255). In the case of a USB modem,
check which 'virtual' serial port is selected by default by the PC.
SERIAL PORT
SPEED Sets the maximum transmission rate for the PC port selected. The default setting on the Universal
Remoter is the maximum value (38400 Baud).
The communication transmission speed set in the PC control software MUST MATCH the relative
transmission rate set for the modem connected.
Modem Init.
String
Enter the AT initialisation string here. The Universal Remoter offers two
preset strings. The shorter of the two
(at&f&k0&c0&r1s2=255 ) is usually
appropriate for internal PCI modems, while the longer one
(at&f0&k0&c0&s0&r1s2=255 ) is usually appropriate for external
modems.
Phone Number
Enter the phone number to dial here (including country code, area code,
etc.)
Click OK to confirm, or ESC to exit without saving.
| USE OF UNIVERSAL REMOTER SOFTWARE - 31