AX Quad Box HD 2400, User Manual

Page: 49 / 160

49
⑤ Polarity
Here, you have options for Horizontal, Vertical, Circular Left and Circular Right. You need to
know the polarity of the transponder that you want to scan.
⑥ FEC (Forward Error Correction)
You need to enter the exact FEC value of the transponder that you want to scan.
⑦ Modulation
Here you have two options for QPSK (SD) and 8PSK (HD).
⑧ Network Scan
Here you have two options for YES and NO. NO is used to scan the transponder (TP) based on
the data that your receiver currently has. YES is used to scan the TP not just based on the existing
TP data but also using new TP data, if there is TP data newly transported from the TP. Naturally,
YES option takes longer while it may results in a better scan result.
⑨ Clear Before Scan
YES is used when you want to delete the existing channel list before you start the automatic scan.
If you want to keep the existing list, select NO .
⑩ Only Free Scan
Here you have two options for YES and NO . You want to scan only Free to Air channels without
any encryption, select YES. Otherwise, select NO to scan all FTA and CAS channels.
Press OK to activate the manual scan. This will take some minutes. As the scan proceeds, you will
see the progressive bar and the newly found services underneath.