background image

Location of installation (Indoor use only)

1. Avoid direct sunlight, exposure to rain and extreme  heat or cold. 

(water parts may freeze or rupture)

2. Place the unit on hard, flat surface to prevent noise, leakage or

shaking.

3. Place unit in an well-ventilated place.

from wall.

5. To keep unit sanitary, avoid harmful gas or excessive heat.

Installation Precautions 

1. Check country power supply: 230V or 115V.

2. Ensure unit is plugged into the right socket.

3. Use grounded socket ONLY.

4. Use socket with circuit breaker.

5. DO NOT share plug with other appliances. 

6. DO NOT touch power socket with wet hands.

7. DO NOT place heavy object on power cord.

Operational Procedures

1. If unit has been tilted or laid down on side, do not start-up for at 

least 30 minutes.

2. Connect plug to socket.

3. Push Power Button for 3 seconds to start-up. 

4. Do a priming process. (See image 1-1, 1-2)

5. Use Menu/Set button for desired water temperature. (see page 13)

6. Wait until unit has generated enough water to drink.

Note: Priming process 

for Quick Start and 

sanitary reason, open 

cap on top of unit and 

pour approx. 5 liters of 

drinkable water.

(Image 1-1 , 1-2)

Installation & Operation 

4. For proper air flow and operation, place unit at least 6 inches away 

Summary of Contents for DEWPOINTE DK-11

















Reviews: