UV light
1. Power Off and unplug unit. Separate rear cover. (loosen & remove 2
screws with Phillips screwdriver)
2. Remove filters. (See water filter replacement)
3. Disconnect the housing of the U.V from ballast.
4. Remove U.V from U.V clip carefully.
(There may be water in hose, fitting and U.V)
5. Pull to remove U.V while pushing the adaptor of the fitting in
opposite direction.
6. Install a new U.V.
7. After U.V exchange, reset the U.V replacement function by using
Menu/Set button. (see page 13)
Air filter
1. Separate air filter bracket by
loosening 2 easy screws with
hand or Phillips screwdriver.
(Image 5-1)
2. Remove air filter and replace
with new air filter. (Image 5-2)
3. After air filter exchange, reset
the air filter replacement
function by using Menu/Set
button. (see page 13)
Water Generating Capacity
Daily Water Production in Lab (liters/day)
3.2
5.2
6.6
8.4
50%
60%
70%
80%
90%
4.1
5.8
8.3
11.5
5.9
7.2
11.7
16.1
6.4
8.2
13.9
18.2
8.3
11.3
17.0
23.0
15
20
25
30
Temp.
Humid.
Note: DO NOT look directly at a shining UV light
