FM radio
1. To select FM, press the
DAB/FM
button, the FM frequency will be
displayed. (F. 8)
2.
To activate auto search, press and hold the
I
◀◀
or
▶▶
I
buttons until it
starts to scan down or up the frequency band, it will stop automatically
once a station has been found.
3.
To activate manual search, repeatedly press the
I
◀ ◀
or
▶ ▶
I
button; Or you can press on the
VOL/SKIP/
SCROLL
control once and when the display shows “<Tuning>”, rotate the
VOL/SKIP/SCROLL
control for your
desired frequency.
4. To select audio mode, press the
PLAY/PAUSE
button to toggle between the “Auto” or “Mono” selection.
Note:
The radio will automatically switch between stereo and mono mode, but you can override this and switch this
function manually which is helpful for poor signal reception.
STORING AND RECALLING PRESET STATIONS (remote control only)
In either DAB or FM, you can store up to 10 stations to the favourite presets; this will enable you to get direct access to
your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the
PROGRAM
button on the remote until
the display shows the preset number and flash. (F. 9)
2.
Press the
SCROLL
▲
or
▼
button to select your desired station preset number.
3.
Finally press the
PROGRAM
button again to confirm your selection, the display will show “Preset # stored”. (F.10)
4.
To recall a preset station that you have stored, press the
MENU/PS/FOLDER +/-
buttons on the remote, the
display will show the preset number and the associated information. It would tune to the station in one second after
the buttons are released. (F.11)
FACTORY RESET
When you move the system to another part of the country, your pre-tuned and stored DAB stations may no longer be
available. If this is the case then you will need to reset your system back to its original factory settings; to perform a
factory reset, please do the following:
1.
Connect the unit to mains and press the
STANDBY
button once to turn the unit on.
2.
Ensure the unit is in DAB mode, then press and hold the
MENU
button until the display shows “Press SELECT to
confirm reset”.
3.
Release the
MENU
button and press on the
SELECT
control once, the display will show “Restarting…” and then
perform full scan function.
4.
After the scan has finished, the radio will select and display the first alphanumerically found station.
Note:
All of your stored DAB & FM presets will be lost once the reset has taken place.
LISTENING TO YOUR COMPACT DISCS
NOTE :
Although this CD/MP3 player can read CD-R and CD-RW discs in addition to normal CDs, the playability of CD-
R and CD-RW discs may be affected by the type of software that was used to create the discs, as well as the quality and
condition of the blank media you are using, 100% playability cannot be guaranteed. This is not an indication of a
problem with the player.
Playing the entire CD
1. When the unit is ON, repeatedly press the
iPod/CD
button to select CD function. The display will first show “CD”
and then finally “NO DISC”. (F.12) (F.13)
2.
Press the
OPEN
button on the top panel to open the CD door, load the disc with the printed label side facing up and
then close the CD door. The display will first show “READING” and then the total track number and time. (F.14)
3.
To start playback from the beginning, press the
PLAY/PAUSE
button, the display will show the current track
number and the elapsed time. (F.15)
4.
If a CD/MP3 disc is being played, the display will show “MP3” together with the current folder and track number. To
see the ID3 tag if available, press the
DISPLAY/INFO
button.
5.
To interrupt playback, press the
PLAY/PAUSE
button once, the display will show “
II
”. (F.16)
6.
To resume playback, press the
PLAY/PAUSE
button again.
7.
To stop playback, press the
■
button.
UK-4
F8
F11
F10
F9
F12
F13
F14
F15
F16
