The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP
address or MAC address in the address box and click the “Add” button.
4.7.4 Security Management
Go to Config
Security
Security Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal
login” function can be enabled here. If this function is enabled, login failure after
trying six times will make the login interface locked. The camera can be logged in
again after a half hour or after the camera reboots.
For some specified versions, anonymous login with a private protocol can be
enabled here. If this function is enabled, enter http://host:port/Anonymous/1[2/3]
(eg. http://192.168.226.201:80/Anonymous/1) via web browser to access the
camera. 1 indicates main stream; 2 indicates sub stream; 3 indicates third stream.
Only video can be viewed by this means and no other operations can be done. If
no such function, please skip the instruction.
Password Security
Please set the password level and expiration time as needed.
Password Level:
Weak, Medium or Strong.
Weak level:
Numbers, special characters, upper- or lower-case letters can be used.
