2.
Check the corresponding version checkbox (Enable SNMPv1, Enable SNMPv2,
Enable SNMPv3) according to the version of the SNMP software that will be used.
3.
Set the values for “Read SNMP Community”, “Write SNMP Community”, “Trap
Address”, “Trap Port” and so on. Please make sure the settings are the same as
that of the SNMP software.
Note:
Please use the different version in accordance with the security level you
required. The higher the version is, the higher the level of the security is.
4.6.6 802.1x
If it is enabled, the camera’s data can be protected. When the camera is
connected to the network protected by the IEE802.1x, user authentication is
needed.
