Avtron ADDvantage-32, Manual

Page: 275 / 290

ADDvantage-32
Advanced Control Module (ACM)
9-5
9.3.2 FILE 10 - ADT LABELS
Contains all of the predefined label definitions for each
analog input listed in File 9.
Typical values could be:
First element - FIL_SPEED__ (spaces are shown as __ )
Next element - FIL_ARM_CUR
Reading the first element of File 10 would return the
following data
..... 46H 49H 4CH 20H 53H 50H 45H 45H 44H 20H 20H ....
F I L S P E E D
9.3.3 FILE 11 - ADT UNITS
Contains the units associated with each of the labels defined
in File 10.
Typical values could be:
First element - __FPM_
Reading this element would return the following data
....... 20H 20H 46H 50H 4DH 20H .........
F P M
This file may be written to and used to modify the units
display.
Sending a write message for this table and the
first element of
........ 20H 20H 59H 50H 4DH 20H ......
Y P M
would modify the display units to be YPM instead of FPM.
9.3.4 FILE 12 - DEFAULT ADT UNITS
This file contains the default units for the corresponding
analog input elements.
9.3.5 FILE 13 - CAL TABLE UNITS
This file contains all of the calibration unit definitions
for the corresponding calibration element of the X-Y taper
tables. This table organization differs from the normal
organization. The corresponding calibration tables, File 14
and File 17, contain 128 elements total, but they are
organized as four sub-tables of 32 elements each. (Refer to
Files 14 and 17.)
9.3.6 FILE 14 - CAL TABLE DEFAULTS
This file contains all of the predefined default values for
calibration.
The organization of this file differs in that the complete
table is broken up into four sub-files. Each sub-file is