AVTECH Software, Inc.
Page 3
AVTECH.com
Wireless Sensor Hubs (RAW-PWSH-HUB & RAW-WSPR-HUB)
Same Floor/Level
When the WiSH/WiSPRs are located on the same floor or distributed at the same level as
the Room Alert:
Room Alert Antenna
Position the Room Alert’s antenna vertically.
WiSH/WiSPR Antenna
Mount the WiSH/WiSPR vertically with the label
facing the Room Alert. (The short side of the
enclosure should be vertical.)
If possible, locate the WiSH Sensors on the top half of the wall to avoid obstacles (people,
desks, cabinets, etc.), which reduce the range of the wireless signal. For example, if the
ceiling height is 8', the optimum height for the WiSH/WiSPR is 6'.
Different Floors/Levels
When the WiSH/WiSPRs are located on different floors or distributed above/below the
Room Alert:
Room Alert Antenna
Position the Room Alert’s antenna
horizontally.
WiSH/WiSPR Antenna
Mount the WiSH/WiSPR horizontally or
vertically with the label facing the Room
Alert. (For the vertical mount, the long
side of the enclosure is vertical.)
Place the WiSH/WiSPR as close as possible to directly above/below the Room Alert for the
most effective vertical wireless range.