Room Alert 3 Wi-Fi
4
AVTECH Software, Inc.
LEDs
Two (2) LEDs display the Link (“L”) state or Status
(“S”) of Room Alert 3 Wi-Fi.
“L” (on the left) lights solidly when the unit is
connected to your wireless network.
“S” (on the right) blinks once when you plug
the unit into power. Otherwise, it is unlit.
Back
Reset Button
A small push button resets Room Alert 3 Wi-Fi to
factory default settings.
Switch Sensor Channel
A pair of dry contacts connects Room Alert 3 Wi-Fi
to any AVTECH switch sensor or dry contact on a
device (e.g., HVAC, generator, pump, fan, etc.) via
standard speaker wire or low-voltage 2-wire cable.
Digital Sensor Port
A standard RJ-11 jack connects any AVTECH digital
sensor to your Room Alert 3 Wi-Fi via a standard RJ-
11 (straight through) telephone cord.
For more information about AVTECH sensors and accessories,
please refer to the
Appendix
at the back of this manual or visit the
Sensors and Accessories sections of
AVTECH.com
.
NOTE