Room Alert 3 Wi-Fi
AVTECH Software, Inc.
5
How To Install Your Room Alert 3 Wi-Fi
Step 1: Connect Your Room Alert 3 Wi-Fi To A Power Source
Plug one end of AVTECH’s International Power
Adapter into the Room Alert 3 Wi-Fi’s power port.
Plug the other end into a surge-protected power
source. Notice that the “S” LED (on the right)
blinks once when the Room Alert 3 Wi-Fi is first
connected to power.
Step 2: Configure Your Room Alert 3 Wi-Fi’s Network Settings
A. Connect To The Room Alert’s Wireless Access Point
In your Windows task bar, select your
Network Connection Status Icon
to
open the list of your networks.
You’ll see the Room Alert 3 Wi-Fi listed as an available wireless network. Its name
(also known as its SSID) will be in this format: 3WXXXXXX.
Select that name, and then select
Connect
.
Use only AVTECH’s International Power Adapter. Others could
damage the Room Alert 3 Wi-Fi and void your warranty. If you
don’t have one, please visit our online store at
AVTECH.com
.
NOTE
