Room Alert 3 Wi-Fi
AVTECH Software, Inc.
13
Current Sensor Status Bar
Below the Status tab is the Current Sensor Status Bar, where you may view basic information
about your Room Alert 3 Wi-Fi and make temporary adjustments to the sensor display.
You may find your Room Alert 3 Wi-Fi’s name and MAC address here.
To determine if your Room Alert 3 Wi-Fi’s firmware is current, you may click
Room Alert 3 Wi-Fi vX.X.X
at the right.
To temporarily modify the refresh interval of the Status screen while viewing, which
is 60 seconds (i.e., every 1 minute) by default, you may enter a value in seconds in
the “Update Every” field. Click outside the field to temporarily commit the change.
To temporarily toggle the temperature scale between Fahrenheit (F) and Celsius (C),
click
Fahrenheit
or
Celcius
.
TIP
Your Room Alert 3 Wi-Fi must be connected to the internet to
check firmware versions.
