HARDWARE OVERVIEW
2
27
1.2 Rear Panel
Note:
The functions on the rear panel may vary, depending on the mode you have.
1) HDMI1
This port is used to connect the monitor which supports HDMI interface for main monitor output
2) HDMI2
This port is used to connect a secondary monitor which supports HDMI interface for secondary monitor
output. For details, please refer to “6.10 DISPLAY” at page 50.
3) VGA
Connect to the VGA port of the monitor which supports VGA video output for main display output.
4) VIDEO OUT
Connect to a CRT monitor for main monitor output.
5) eSATA
This port is used to connect a storage device supporting eSATA interface; for instance, an external disk array.
Note:
Please purchase a disk array supporting Linux system to ensure your device works properly. For
the compatible list, please refer to “APPENDIX 6 DISK ARRAY COMPATIBLE LIS” at page 78.
Note:
If the disk array is not connected or detected well, check the mode of your disk array, or do a
reset default on your disk array and try again.
6) WAN
This port is used to connect your device to Internet.
7) LAN
This port is used to connect IP cameras to this device with a hub (if necessary) locally.
8) MIC IN
Connect to a microphone for audio transmission.
9) AUDIO OUT
Connect to a speaker for audio transmission.
10) External I/O Ports
These ports are used to connect external I/O devices, such as magnetic contacts or buzzers, or external
control devices, such as other brand’s speed dome camera or keyboard controller.
11) USB 3.0
Insert a compatible USB flash drive or USB hard disk for video backup.
Note:
For the compatible list of USB flash drives, please refer to “APPENDIX 3 COMPATIBLE USB FLASH
DRIVE LIS” at page 75.
12) DC IN
Connect to the supplied adapter.
13)
Power Switch
Switch to “
—
” to turn on the power, and “ ” to turn off the power.
Summary of Contents for H.265 NVR
Page 40: ...MAIN MENU 35 357...
Page 60: ...MAIN MENU 55 557...