FREQUENTLY-USED FUNCTIONS
24
247
Step3: The video footage can only be saved to a USB device. Specify where to save in the USB device in
STORAGE
.
Step4: Choose
BACKUP
to start. The backup video will be in the AVI format.
Note:
When the video compression format is H.265, please use the video player which supports H.265
to play the video footage.
5.5 System Logout
When different user accounts are created for system management, make sure you log out after your access in
case other people access the system with your account.
Choose
MENU
→
POWER CONTROL
, and choose
to log out the system.
Note:
The default user name and password are both
admin
, which is the highest user level.
5.6 Hardware Reset
This is used when you lose the access user name and / or password. This will reset your recorder to its factory
default values.
For 8-bay 36CH & 16CH models
Step 1: Power off your recorder.
Step 2: Find a pinhole on the rear panel of your recorder, next to the VGA port.
Step 3: Use a thin sturdy object, such as a straightened paperclip, and push it through the hole to press the
reset button. Press and hold the button, and power on your recorder at the same time. Release the
button when you hear the second beep sound. You’ll see the reset message on the screen.
For 16CH models without PoE
Step 1: Power off your recorder and remove the top case to reveal the
main board of the recorder.
Step 2: Find the two points of HT1 & HT2 on the mainboard. These
two points are for hardware reset.
Step 3: Use a thin sturdy object, such as a paperclip or forceps, to
touch these two points at the same time for short circuit.
Step4: With the two points touched, power on your recorder and wait
till you hear the second beep sound and the reset message
shows on the screen.
For 16CH, 9CH & 4CH models with PoE
Step 1: Power off your recorder.
Step 2: Open the top case of the recorder to reveal the main board, and find a
blue
button on the board. It’s
the hardware reset button.
Step 3: Press and hold the blue button, and power on your recorder at the same time. Release the button
when you hear the second beep sound and the reset message shows on the screen.
Summary of Contents for H.265 NVR
Page 40: ...MAIN MENU 35 357...
Page 60: ...MAIN MENU 55 557...