MAIN MENU
54
547
6.11 PERIPHERAL
6.11.1 LOCAL
LOCAL
MOUSE SENSITIVITY
0
5
10
REMOTE CONTROL ID
0
1) MOUSE SENSITIVITY
Select the mouse sensitivity. The higher the value, the more sensitive the mouse.
2) REMOTE CONTROL ID
This function is available when users need to control two or more recorders with one IR remote controller.
The ID set here is used to identify the recorder the remote controller is going to control. Please also read the
user manual of the IR remote controller for details.
6.11.2 JOYSTICK
In this menu, you can adjust the speed of pan / tilt movement of the speed dome camera or a motorized-pan
camera.
Note:
To control the movement of the speed dome camera, you can choose
from the PTZ control
panel and move on the screen), or simply connect the compatible joystick, AVX102, to the
recorder.
JOYSTICK
MAX SPEED OF X AXIS
100
MAX SPEED OF Y AXIS
100
CURVE ORDER OF X AXIS
1
CURVE ORDER OF Y AXIS
1
6.11.3 ALARM OUT
Note:
This function is available for the models which support alarm-out connection to the recorder itself.
Please check the specifications of your recorder to know if your recorder supports this function.
To know how to configure the alarm-out device connected to an IP camera, please refer to “6.1.5
ALARM OUT” at page 30.
This function is used when the external alarm-out device is connected directly to the recorder. You can configure
an alarm-out device to activate continuously or activate only for a period of time when it’s triggered.
In
RESTORE AUTOMATICALLY
,
Choose
DISABLE
to allow the device to activate continuously when it’s triggered unless you switch it off manually
from the alarm-out switch control panel (
) on the live view.
Choose
ENABLE
to allow the device to activate only for a period of time (
1
/
3
/
5
/
10
/
20
/
30
/
60
/
120
/
180
seconds) when it’s triggered.
ALARM OUT
NAME
RESTORE AUTOMATICALLY
ALARM OUT DURATION (SECS)
Alarm Out1
DISABLE
1
Alarm Out2
ENABLE
5
APPLY
Summary of Contents for H.265 NVR
Page 40: ...MAIN MENU 35 357...
Page 60: ...MAIN MENU 55 557...