Avtech AVR-G1-B-P-EMRA-R5-RP-IM, Instructions Manual

Page: 25 / 39


Press the CHANGE button. The output submenu will appear.

Press MOVE until the arrow pointer is pointing at the “ON” choice.

Press CHANGE to return to the main menu.
9. To change the output amplitude:

Press the MOVE button until the arrow pointer is pointing at the amplitude menu
item.

Press the CHANGE button. The amplitude submenu will appear. Rotate the
ADJUST knob until the amplitude is set at +240V.

Observe the oscilloscope. You should see 5 us wide, 240V pulses.

Rotate the ADJUST knob. The amplitude as seen on the oscilloscope should
vary.

Press CHANGE to return to the main menu.
10. Repeat step 9, but set the amplitude to zero.
11. This completes the operational check.
25