FUSES
This instrument contains four fuses. All are accessible from the rear-panel. Two protect
the AC prime power input, and two protect the internal DC power supplies. The
locations of the fuses on the rear panel are shown in the figure below:
AC FUSE REPLACEMENT
To physically access the AC fuses, the power cord must be detached from the rear
panel of the instrument. The fuse drawer may then be extracted using a small flat-head
screwdriver, as shown below:
13
Fuse
Drawer
Pry out the fuse
drawer using a
screwdriver.
Fuses #1 and #2
(AC fuses)
Fuse #4
(DC fuse)
Fuse #3
(DC fuse)
Summary of Contents for AVR-G1-B-P-EMRA-R5-RP-IM
Page 32: ...PCB 158R4 LOW VOLTAGE POWER SUPPLY...
Page 39: ...PERFORMANCE CHECK SHEET 39...
