5
7. Find the supplied monitor base accessories, and fix the monitor base to the monitor as indicated below:
a) Fix the monitor base to the monitor with the supplied screws.
b) Hook the screw cover removed in the second step to the monitor, and push it downward to lock it.
2.3 Connect Camera
The cameras must be connected and power-supplied before the DVR is powered on. The DVR will automatically
detect the video system of the connected camera(s) (NTSC / PAL), and switch itself to the correct system.
1) Video cable connection
Connect the camera video output to the DVR video input port with a coaxial cable or RCA cable with BNC
connector.
2) Audio cable connection (if your camera supports the audio function)
Connect the camera audio output to the DVR audio input port with a coaxial cable or RCA cable with BNC
connector.
3) Power connection
Connect the camera with indicated power supply.
2.4 Power On
Find the power cable supplied with the LCD monitor, and connect it to the power jack “AC POWER” on the LCD
monitor, and to the power outlet. The DVR will be on and initialized.
Note:
Before the DVR is powered on, make sure the cameras are connected and power-supplied for the
detection of the camera video system to be correct.
Note:
To ensure that your LCD DVR works constantly and properly, it's recommended to connect the
power to an UPS, Uninterruptible Power Supply, for continuously operation. (Optional)
2.5 Set Date and Time
After the DVR initialization is completed, set the date and time first.
Press “Menu” and enter the password to go to the menu list. The default password is 0000. Move to “DATE”, and
you can set the date / time / daylight saving in the “DATE” menu list.
Note:
Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all HDD data, and start recording again.
Note:
DVR time might reset after the disconnecting of the DVR power, for example, caused by a power
outage, because the DVR battery is low or even running out of power. If so, please replace the
DVR battery, CR2032, as instructed in “APPENDIX 5 DVR BATTERY REPLACEMENT” at page 34.
Summary of Contents for AVL683
Page 26: ...23...