VIDEO VIEWER MISCELLANEOUS CONTROL PANEL
-22-
Function Description
Apply
After setup, click “Apply” to confirm.
Notify
In this section, you can select to enable the function of E-mail and/or FTP notification.
Item Description
Method
‧
If the E-mail notification function is activated, the network camera will send the captured video clip
to the assigned E-mail address(s) once motion-trigger or alarm-trigger recording happened.
‧
FTP
If the FTP notification function is activated, the network camera will upload the captured video clip to
the specified FTP site once motion-trigger or alarm-trigger recording happened.
Video Type
Display the video type of the notification files. The video type will vary according to the setting of
“Stream Format” in the “
” (Address Book) page.
Total Time
If you’ve set the video type as H264 / MPEG4, you can set the record time of the notification video
clip as 1 ~ 5 seconds.
If you’ve set the video type as JPEG, then this option stands for 1 ~ 5 images.
Note:
If your network camera & mail server are not connected by LAN, and the network connection is not
stable or failed, the notification method by Email or FTP might be failed.
Note:
Sometimes the length of the video clip emailed or uploaded might not be the same as the one you
specified in “Total Time”. This is because the system can only emailed or uploaded up to 500KB video
clip.
Network
Click “
” (Miscellaneous Control)
→
“
” (Server Setting)
→
“Network” to go into the “Network” page. In
“Network” page, you can set the network configuration of the network camera.
Select the network type you will be using for the network camera connection. There are 3 network connection
types: Static IP, PPPOE and DHCP.
Note:
PPPOE and DHCP network connection types are required to apply the DDNS service to get a
“Hostname” to correspond to a dynamic IP address. Please refer to “DDNS” section for details.
