MAIN MENU
33
5.4.7 RECORD
Note:
Please DO NOT change the date or time of your recorder after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all hard disk data, and start recording again.
ADVANCED CONFIG
CONNECTION
MANUAL RECORD
OFF
CAMERA
EVENT RECORD
ON
DETECTION
TIMER RECORD
OFF
ALERT
PRE-ALARM RECORD
ON
NETWORK
OVERWRITE ON
DISPLAY
KEEP DATA LIMIT (DAYS)
OFF
RECORD
RECORD CONFIG
SETUP
NOTIFY
PSE
MULTICASTING
EXIT
8) MANUAL RECORD
Set the manual recording function on / off.
9) EVENT RECORD
Set the event recording function on / off.
10) TIMER RECORD
Set the timer recording function on / off.
11) PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the recorder will record 8MB data before
an alarm / motion event is triggered.
12) OVERWRITE
Select “ON” to overwrite previous recorded data in your HDD when the HDD is full. When this function is on
and the HDD is full, the recorder will clear 8GB data from the oldest for continuous recording without notice.
13) KEEP DATA LIMITS (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data will be removed, or
select “OFF” to disable this function.
14) RECORD CONFIG
Click “SETUP” to enter the setting page individually for manual record, event record and timer record.
For details, please refer to “5.1.1 GENERAL” at page 18.
