MAIN MENU
27
5.4 ADVANCED CONFIG
5.4.1 CONNECTION
To manually assign the address of your camera connected locally, click “URI” to modify.
ADVANCED CONFIG
CONNECTION
CHANNEL
URI
CONFIG
CAMERA
CH1 AVTECH://ip_office.ddns.eagleeyes.tw:80
SETUP
DETECTION
CH2 ONVIF://10.1.1.14:88
SETUP
ALERT
CH3 AVTECH://10.1.1.30:88
SETUP
NETWORK
CH4 AVTECH://10.1.1.12:88
SETUP
DISPLAY
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
Then, click “SETUP” to enter the access information of the camera:
CONFIG-CH1
CACHE TIME (MSEC)
VENDOR
AVTECH
DEVICE
IPCAM(FIXED)
PROFILE
PROFILE-3
TYPE
H264
IMAGE SIZE
720 X 480
QUALITY
I.P.S. 30
AUDIO ON
RESOLUTION LIST
(For selected models only)
Select
All
EXIT
Step1: Click “DEVICE” to detect and make sure the access information you’re intended to connect is correct.
Step2: Select the image size, image quality, and I.P.S.
Note:
The options selectable for “IMAGE SIZE” and “I.P.S.” depends on the camera you’re intended to
connect.
Note:
The “IMAGE SIZE” options for selected 8CH models are up to 1280 x 720.
Step3: (Optional) For the camera with audio recording, select “ON” or “OFF”.
Step4: (For selected models only) Assign the resolution you could choose based on you need. This change will
affect the resolution options you could choose for live viewing and recording.
