AVT MAGIC ISDN, Hardware Description

Page: 45 / 66

PA G E 4 5
O P E R A T I O N W I T H T H E O P E R A T O R P A N E L
4.6 Programming example: setting the RS232C for control via a PC
Key Display Remarks
Main menu This is the starting point of the menu tree.
To obtain this menu from any other menu
press the Escape key .
Calling up the CTRL submenu
With the “right” cursor key, select the
SYS menu.
SYS submenu Activate the SYS submenu by pressing
the “down” cursor key.
With the “right” cursor key, select the
IFACE menu.
IFACE submenu Press the “down” cursor key to call up the
IFACE submenu.
With the „right“ cursor key, select the
CTRL menu.
CTRL submenu Press the “down” cursor key to call up the
CTRL submenu.
Choosing the interface to be set
( )
With the „right“ / „left“ cursor keys, select
the required interface (e.g. V24).
Meanings:
V24
RS232C serial interface
RS RS485 bus interface
TTL User I/O interface
With the „down“ cursor key, select the ap-
propriate submenu.
*CALL RD DIS CFG SYS MEM
Call menu
CALL RD DIS CFG *SYS MEM
System setups/tests
*ALRM IFACE LOOP ETC
Show alarms
ALRM *IFACE LOOP ETC
Interface setups
*LINE AUDIO DATA CTRL
Line interface select
LINE AUDIO DATA *CTRL
Ctrl interface setup
*V.24 RS TTL
Setup V.24-Ctrl
*V.24 AUX RS TTL
Setup V.24-Ctrl
*MODE RATE BITS PARITY
Set packet/string mode