AVT MAGIC AD1 ETI, Hardware Manual

Page: 75 / 106

PAGE 75
M A G I C A D 1 E T I M u l t i S o f t w a r e
To change the IP address at the front keypad of the system, press the softkey
Menu
→
system settings
→
LAN settings
→
IP Address
. Enter now the desi-
red IP address. When entering manually you have to be sure that the IP
address is not already used by another unit
1
.
Please enter the correct IP address of the system under
IP Address
.
Edit a MAGIC AD1 ETI Decoder of the control list
To edit a system of the control list, select the desired entry and click on the
Add/Edit
button. The window for the
Communication Interface Parame-
ters
is displayed. Now you can make your changes to the entry.
Delete a MAGIC AD1 ETI Decoder from the control list
To delete a system from the control list, select the desired entry and click on
the
Delete
button. For safety reasons you have to confirm that you really want
to delete the entry.
Import/Export a control list
With the button
Load from File
you can import a complete control list from
a data carrier. The file extension of the system configuration file is always ‘
.ifl
‘
(Control Interface List Files).
Correspondingly, via
Save in File
a complete control list can be saved. The
storage location and position can be chosen by yourself.
To save your settings, press the
OK
button.
To cancel your settings, press the
Cancel
button.
1
To check if the IP address is already used in the network, follow the instructions: Under Windows
XP click on
Start
→
Execute ...
. Enter
cmd
in the command line. An entry window is displayed
in which you must enter
ping
xxx.xxx.xxx.xxx. Whereas xxx stands for the IP address you want
to check.
NOTE
Maybe further settings are necessary (e.g. sub-net mask, standard:
255.255.255.000). In that case please contact your network administrator, who
can tell you the correct settings.
TIP
The currently allocated IP address of the system can be displayed by pressing
the right telephone button
if currently no Audio connection is estab-
lished.