AVT MAGIC AD1 ETI, Hardware Manual

Page: 46 / 106

PAGE 46
W i n d o w s P C S o f t w a r e
4.7.2.2.4 SNMP Parameter
To integrate the MAGIC AD1 ETI Decoder into a network management sys-
tem, the SNMP function can be used. Currently, the system supports SNMP
V2.
FIG. 22 SNMP PARAMETER
Under SNMP Parameter the function can be activated by enabling the option
SNMP
.
Please ask your network management system administrator for the correct
SNMP settings.
– The
Read Community
entry is an identifier to read data. The name has to
be identical with the name in your Management System. By default, the
name
public
is used.
– Under
Trap Community
you define the name for the trap datagrams. The
name has to be identical with the name in your Management System.
– Please enter the port on which MAGIC AD1 ETI receives messages under
SNMP Port
. The default setting is usually
Port 161
.
– The MAGIC AD1 ETI Decoder allows the addressing of up to three differ-
ent Network Management Systems. Please enter the corresponding IP ad-
dresses and Ports under
NMS 1 (IP Adr./Port)
,
NMS 2 (IP Adr./Port)
and
NMS 3 (IP Adr./Port)
.
– Under
System Description
you can assign a name for the MAGIC AD1
ETI Decoder.
– Under
Contact
an email address can be entered.
– Under
Location
you can enter the location of the decoder.
– If a trap is to be sent when wrong community names are used, please ena-
ble the option
Send authentication failure traps
.