AVT MAGIC AD1 ETI, Hardware Manual

Page: 45 / 106

PAGE 45
W i n d o w s P C S o f t w a r e
Main nominal Level
• If you select the analogue mode for input or output, the corresponding
slide controller is displayed to set the nominal Audio level of the XLR Au-
dio interfaces (
Main Nominal Level
). The main nominal level can be ad-
justed within a range of
-3 ... +9 dBu
in steps of 1-dB. The headroom is 6
dB. If you want to have the maximum level of 15 dBu for the system, you
need to set 9 dBu as main nominal level. The default setting is 0 dBu.
Audio Level Alarm
The
Audio Level Alarm
function checks the level at the Audio output of the
MAGIC AD1 ETI Decoder. If the audio level falls below a certain threshold
value for an indicated time interval, the alarm will be set (see CHAPTER 4.9.1,
Page 59). The threshold value can be selected under
Threshold
. The time
frame can be set under
Interval
.
4.7.2.2.3 LAN Interface
Under LAN Interface you ned to enter the configuration details of the LAN
interface.
FIG. 21 LAN INTERFACE