AVT MAGIC AD1 ETI, Hardware Manual

Page: 69 / 106

PAGE 69
O p e r a t i o n v i a D i s p l a y a n d K e y p a d
– Coding Mode (
Mode
)
– Sampling frequency (
SAMPLING
).
For scrolling up and down, please use the cursor keys and at the front
keypad.
Adjusting the Headphones Level
To adjust the headphones level you can use the cursor keys and at the
front keypad.
Alarm Messages
If you see a blinking
ERR
button instead of the
LIST
button on the top right cor-
ner of the display, an error has occurred in one of the subchannnels. To see
which subchannel has generated the alarm message, please press the
ERR
but-
ton.
If there is a problem with the 2-Mbit/s connection, the following error messa-
ges are displayed:
– E1: no signal
– E1: no sync.
5.2.2 Working with Presets
The MAGIC AD1 ETI Decoder differentiates between
system settings
and
operation settings
.
System settings are settings that do not change during normal operation such
as e. g. language, date/time etc. These parameters can not be saved as
Preset
since a configuration is usually only required when the system is put into ope-
ration.
Operation settings need to be reconfigured depending on the application. To
easily recall recurring configurations you can store up to 10
Presets
.
You reach the menu for the
Presets
by pressing the
menu
softkey once, the
cursor key three times and by pressing the softkey
select
once as confir-
mation.
In the insert field
Presets
you can search for a certain
Preset
. As soon as you
enter a character with the help of the alphanumerical keypad of the system,
the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a preset with the cursor keys and from
the list
.
If you now press the
Ok
button the selected
Preset
is loaded immediately.
By the softkey
Opt.
(Options) the following functions which you can select via
the softkey
select
are realized:
–
load
: The selected
Preset
is loaded.
–
new
: With the help of this function you can create a new
Preset
. All current
Operation Settings are stored as basic and can be adjusted afterwards.