AVT MAGIC AC1 XIP/XIP RM, Hardware & Software Manual

Page: 21 / 176

PAGE 21
P u t t i n g t h e s y s t e m i n t o o p e r a t i o n
3.5 Operating modes of the system
The figures below show the systems in different operating modes and their
wiring.
3.5.1 ISDN operation
In the ISDN operating mode two independent B channels are available which
can be used seperately for mono transmissions or in combination for a stereo
transmission.
For live reports a professional Headset can be connected.
FIG. 5 MINIMUM WIRING FOR ISDN OPERATION
The maximum wiring with all options is shown in Fig. 6. Via the RS232 con-
trol interface a PC with
MAGIC DC7/AC1 XIP Software or a MAGIC
DC7/AC1 Keypad can be connected as alternative to the operation by the front
keypad and display.
FIG. 6 MAXIMUM WIRING FOR ISDN OPERATION
TIP
If the PC software and the keypad are used simultaneously, the LAN inter-
face can be used for PC control.
Power supply
interface
ISDN
interface
Analogue Audio 1 (left)/(AES/EBU) Input
Analogue Audio 1 (left)/(AES/EBU) Output
Analogue Audio 2 (right)/(clock) Input
Analogue Audio 2 (right)/(clock) Output
Headset
Option:
Earthing
interface
power supply
PC with Option:
MAGIC DC7/AC1
Hybrid Keypad
MAGIC DC7/AC1
Software
interface
ISDN-
interface
REL2
TTL1
TTL2
TTL3
Programmable
TTL-IN-/Outputs
REL1
Programmable
relays
Analogue Audio 1 (left)/(AES/EBU) Input
Analogue Audio 1 (left)/(AES/EBU) Output
AnalogueAudio 2 (right)/(clock) Input
Analogue Audio 2 (right)/(clock) Output
Headset
Option:
2 x transparent
data channels
(RS232 or RS485)
TTL4
TTL5
TTL6