AVT MAGIC AC1 XIP/XIP RM, Hardware & Software Manual

Page: 120 / 176

PAGE 120
O p t i o n : M A G I C D C 7 / A C 1 K e y p a d
6.3 MAGIC DC7/AC1 Keypad Advanced
The optional MAGIC DC7/AC1 Keypad Advanced (order number 800230) al-
lows additionally a comfortable handling of the integrated Audio mixer in
contrary to the basic version
.
The following figure shows the operating elements of the keypad.
FIG. 81 KEY ASSIGNMENT MAGIC DC7/AC1 KEYPAD ADVANCED
Please connect the 9 pole SUB-D connector of the MAGIC DC7/AC1 Keypad
with the RS232 interface (see CHAPTERA4.3, Page 146) of the MAGIC
DC/AC1 XIP system. Since the MAGIC DC7/AC1 Keypad requires its own po-
wer supply, you must connect the 230V external power supply included in
the delivery with a power socket and the 6 pole Mini-DIN female of the exter-
nal power supply with the 6 pole Mini-DIN connector (violet) of the breakout
cable. The 8 pole Mini-DIN connector (black or white) must be plugged into
the socket
MAGIC DC7/AC1 Keypad . If everything is connected correctly the
display is now illuminated. After switching on the system
1
, e.g. the status
message on the left hand side is displayed after booting.
NOTE
To use the keypad with MAGIC DC7/AC1 XIP , you need to configure the in-
terface parameters of the RS232 interface in the following way: 9600 Baud , no
parity . With the Quick Menu function you reach the setting of the RS232 pa-
rameters directly via the key sequence
Menu 1 3
. Please select
Keypad 9600, no
1
If the system was already switched on, please press the „C“ or „AC“ button once.
Selcection
of the
Audio interface
Selection
of the
Audio source
DISCON. 7 KHZ G.7
Interface: ISDN