AVT MAGIC AC1 XIP/XIP RM, Hardware & Software Manual

Page: 121 / 176

PAGE 121
O p t i o n : M A G I C D C 7 / A C 1 K e y p a d
6.4 Functions of the Keypad
Below the functions of the keypad are listed in table form.
TAB. 4 FUNCTIONS OF KEYS
Key Function
Numerical block to enter the calling number
0
..
9
.
When the
SHIFT
button (
^
symbol in the display) is pres-
sed, a saved quick dial number
QD0
...
QD9
is called. If no
calling number is programmed, the message
No QD assi-
gned!
(No quick dial number assigned!). The
Shift
mode is
left automatically after a quick dial key is pressed.
*
key to enter a special function at a telephone system.
When the
SHIFT
button (
^
symbol in the display) is pres-
sed, the current firmware
Version
of the system is dis-
played. The
Shift
mode is left automatically after the key
is pressed.
#
key to enter a special function at a telephone system.
When the
SHIFT
button (
^
symbol in the display) is pres-
sed, the display switches between calling number and le-
vel meter in the second line. The
Shift
mode is left auto-
matically after the key is pressed.
Via these keys, a telephone book entey can be selected.
The cursor can be moved up and down in steps of 1.
When the SHIFT button ( ^ symbol in the display) is pres-
sed, the cursor moves in steps of 5. The
Shift
mode is left
automatically after the key is pressed.
By pressing the button
AC
the entered calling number is
deleted completely.
By pressing the button
C
the last numerical character of
the entered calling number is deleted.
The button
Mode 1
allows you to select the Transmission
Modes for the first connection. To select the next available
mode, please press the key again (see CHAPTER4.7.2.2.1,
Page 61).
The button Mode 2 allows you to select the transmission
mode telephone or 7- Hz for the second connection. A se-
cond connection is only possible, if for the first connection
only one B channel is used (see CHAPTER4.7.2.2.1,
Page 61).
To establish a connection, please enter first the desired
calling number. Then, select the required transmission
mode with the
Mode 1/2
buttons. By pressing the button
CALL 1
/
2
tht calling number is dialled.
If the calling number consists of more than 8 numerical
characters, the last eight characters plus a „
.
“ placed in
front are displayed.
By pressing the button
DROP 1
respectively
DROP 2
, connec-
tion 1 or connection 2, respectively, is dropped.
DISCON. Telephone
5271130
DISCON. 7 KHZ G.7
SW-Version: 1.322
Connect TEL
Sende-
pegel
Empfangs-
pegel
Übertragunsgs-
modus
Leitungs-
zustand
DISC 15K. |CONN 7 K.
|.78772245