AVT MAGIC AC1 XIP/XIP RM, Hardware & Software Manual

Page: 119 / 176

PAGE 119
O p t i o n : M A G I C D C 7 / A C 1 K e y p a d
The
Mode
key allows you to select the Transmission Mo-
des.
To establish a connection, please enter first the desired
calling number. Then, select the required transmission
mode with the
Mode
buttons. By pressing the button
CALL
the calling number is dialled.
If the calling number consists of more than 8 numerical
characters, the last eight characters plus a „
.
“ placed in
front are displayed.
If you press this button again during a connection, it can
be switched between the preciously defined
Audio
Mixer
Presets. The selected mixer preset is displayed by the first
alphabetical character in the name of the mixer preset.
By pressing the button
DROP
the connection is dropped.
By pressing the button
Status
all connection parameters
of the Audio connection are displayed (e.g. coding algo-
rith, bit rate). Pressing the button again, the parameters of
an optionally configured data transmission, which is in
parallel possible to the Audio transmission.
By pressing the
Quick dial
keys a previously saved calling
number is dialled or a stored configuration (preset) is
loaded.
Storing Quick Dial numbers (
QD
): Please enter the calling
number you want to be saved via the numerical block
0
...
9
. Then, press the desired
Quick Dial
button. On the dis-
play the message
Store QD: QD/C
appears. Now press the
same
Quick Dial
button again. To cancel the saving press
the
C
button.
With the
Shift
button you reach the „second le-
vel“functions of keys (grey labeling) respectiely the „se-
cond quick dialling“level.
If
SHIFT
is activated, the
^
symbol is displayed.
TAB. 3 FUNCTIONS OF KEYS
Key Function
DISC 15K. |CONN 7 K.
|.78772245
DISCON. 15KHZ 1B
Store QD: Press QD/C