![AVT Manta G-031B/C Technical Manual Download Page 99](http://html1.mh-extra.com/html/avt-manta/g-031b-c/g-031b-c_technical-manual_3034341099.webp)
Camera interfaces
MANTA Technical Manual
V6.0.1
99
Control signals
The inputs and outputs of the camera can be configured by software. The differ-
ent modes are described below.
Inputs
Input/output pin control
All input and output signals running over the camera I/O connector are con-
trolled by the I/O strobe commands. See
AVT Manta Camera Controls
.
Outputs
Output features are configured by software. Any signal can be placed on any
output. The main features of output signals are described below:
Note
For a general description of the
inputs
and
warnings
see the
Installation Guide,
Chapter
MANTA input description
.
Figure 55: Input block diagram
Note
For a general description of the
outputs
and
warnings
see the
Installation Guide
, Chapter
MANTA output description
.
Polarity
selectable
via software
Input state
Input signal
Opto-
Coupler
LP filter